Fiber Optic Transmission Energy Feedback Galvanometer Welding

Model NO.: 001
Beam Quality: M2; 1.5
Trademark: Dapeng Laser
Transport Package: Wooden Case Parking
Specification: 2000*1070*1170mm
Origin: Shenzhen/China
HS Code: 84561000
Model NO.: 001
Beam Quality: M2; 1.5
Trademark: Dapeng Laser
Transport Package: Wooden Case Parking
Specification: 2000*1070*1170mm
Origin: Shenzhen/China
HS Code: 84561000
Fiber optic transmission energy feedback galvanometer welding

Fiber Optic Transmission Energy Feedback Galvanometer Welding

Application industry

* 3C electrical metal parts welding
* Mobile phone precision parts welding
* Precision stamping connector welding
* Precision medical equipment welding
* All kinds of metal spot welding, stack welding and so on


Features:

  Laser welding system is the use of pulsed xenon lamp pumped Nd: YAG laser crystal output 1064nm wavelength laser,Real-time control of laser power negative feedback technique with arbitrary waveform ensures good stability and repeatability of laser power and its waveform in working condition,Product laser power from 200W to 600W covered a small, medium and high power system,Basically meet the needs of precision welding industry.Mainly for thin-walled materials, precision parts of the welding,Can achieve spot welding, butt welding, stack welding, sealing welding and so on,With high aspect ratio, small weld width, small heat affected zone, small deformation, fast welding speed, weld formation, beautiful, high weld quality, no stomata, precise control, small focusing spot, high positioning accuracy,Optical fiber transmission easy to achieve automation.In the battery industry, IT industry, electronic devices, optical communications industry, the sensor industry, the hardware industry, auto parts industry, mold repair industry, jewelry welding industry, glasses industry, porcelain teeth, solar industry, electric industry has been widely used.

Product advantages:  

 Energy negative feedback laser welding machine works is the output of the laser to add an energy detection device used to detect the size of laser energy,And real-time feedback of the signal to the control side, compared with the theoretical set of energy to form a closed-loop control system to achieve accurate control of laser energy output purposes.    Energy negative feedback technology can make the laser output energy has good repeatability, in simple terms, is to ensure that each output of laser energy stability,This can effectively improve product productivity.    The output waveform can be arbitrarily set according to the welding material, shape and so on In the specific parts of the welding process, according to the work of the shape and material,Change the output waveform of laser energy,Can greatly improve the quality of welding,And even some of the traditional laser welding problems can also be resolved by changing the output waveform of the laser.    Laser can achieve multi-fiber output at the same time ,Compared with the traditional hard light output system, you can increase the degree of freedom of processing,Can be multi-beam at the same time processing and multi-station processing, for more sophisticated welding provides the conditions.


Technical Parameters
 
model DP-PFW150
laser power 150W-300W(optional)
wavelength 1064nm
Pulse Width 0.3-20ms
Pulse frequency 1-100HZ
Aim at positioning red light/CCD
Scanning range 150X150mm (optional)
Maximum single pulse energy 100J/110J/120J
Minimum spot diameter 0.2mm
gross power 6KW
electricity demand AC220V/30A /AC380V/30A /AC380V/60A
chiller water cooling
size 2000*1070*1170mm (L*W*H)
Operating environment requirements temperature 0-40ºC,humidity 20%-80%


Sample graph showing

Fiber Optic Transmission Energy Feedback Galvanometer Welding


Fiber Optic Transmission Energy Feedback Galvanometer Welding
Fiber Optic Transmission Energy Feedback Galvanometer Welding

Our core advantages:

1. Usually have 50 units of laser marking machine(Fiber, CO2, UV, Mopa) in stock, lead time 3-5 days.
2. Sold 4500 units of laser machines in China market in 2017, with reasonable price.
3. Fiber Laser cutting machine, (700W, 1000W, 1500W+ laser cutter), usually sell 30 units/month in China.

We are looking for distributor. Price is more competitive.
Videos: www.facebook.com/dapenglaser    www.linkedin.com/in/dapenglaser 
Presentation video: https://youtu.be/17WQW78NgOQ
Fiber optic transmission energy feedback galvanometer welding

Fiber Optic Transmission Energy Feedback Galvanometer Welding

Application industry

* 3C electrical metal parts welding
* Mobile phone precision parts welding
* Precision stamping connector welding
* Precision medical equipment welding
* All kinds of metal spot welding, stack welding and so on


Features:

  Laser welding system is the use of pulsed xenon lamp pumped Nd: YAG laser crystal output 1064nm wavelength laser,Real-time control of laser power negative feedback technique with arbitrary waveform ensures good stability and repeatability of laser power and its waveform in working condition,Product laser power from 200W to 600W covered a small, medium and high power system,Basically meet the needs of precision welding industry.Mainly for thin-walled materials, precision parts of the welding,Can achieve spot welding, butt welding, stack welding, sealing welding and so on,With high aspect ratio, small weld width, small heat affected zone, small deformation, fast welding speed, weld formation, beautiful, high weld quality, no stomata, precise control, small focusing spot, high positioning accuracy,Optical fiber transmission easy to achieve automation.In the battery industry, IT industry, electronic devices, optical communications industry, the sensor industry, the hardware industry, auto parts industry, mold repair industry, jewelry welding industry, glasses industry, porcelain teeth, solar industry, electric industry has been widely used.

Product advantages:  

 Energy negative feedback laser welding machine works is the output of the laser to add an energy detection device used to detect the size of laser energy,And real-time feedback of the signal to the control side, compared with the theoretical set of energy to form a closed-loop control system to achieve accurate control of laser energy output purposes.    Energy negative feedback technology can make the laser output energy has good repeatability, in simple terms, is to ensure that each output of laser energy stability,This can effectively improve product productivity.    The output waveform can be arbitrarily set according to the welding material, shape and so on In the specific parts of the welding process, according to the work of the shape and material,Change the output waveform of laser energy,Can greatly improve the quality of welding,And even some of the traditional laser welding problems can also be resolved by changing the output waveform of the laser.    Laser can achieve multi-fiber output at the same time ,Compared with the traditional hard light output system, you can increase the degree of freedom of processing,Can be multi-beam at the same time processing and multi-station processing, for more sophisticated welding provides the conditions.


Technical Parameters
 
model DP-PFW150
laser power 150W-300W(optional)
wavelength 1064nm
Pulse Width 0.3-20ms
Pulse frequency 1-100HZ
Aim at positioning red light/CCD
Scanning range 150X150mm (optional)
Maximum single pulse energy 100J/110J/120J
Minimum spot diameter 0.2mm
gross power 6KW
electricity demand AC220V/30A /AC380V/30A /AC380V/60A
chiller water cooling
size 2000*1070*1170mm (L*W*H)
Operating environment requirements temperature 0-40ºC,humidity 20%-80%


Sample graph showing

Fiber Optic Transmission Energy Feedback Galvanometer Welding


Fiber Optic Transmission Energy Feedback Galvanometer Welding
Fiber Optic Transmission Energy Feedback Galvanometer Welding

Our core advantages:

1. Usually have 50 units of laser marking machine(Fiber, CO2, UV, Mopa) in stock, lead time 3-5 days.
2. Sold 4500 units of laser machines in China market in 2017, with reasonable price.
3. Fiber Laser cutting machine, (700W, 1000W, 1500W+ laser cutter), usually sell 30 units/month in China.

We are looking for distributor. Price is more competitive.
Videos: www.facebook.com/dapenglaser    www.linkedin.com/in/dapenglaser 
Presentation video: https://youtu.be/17WQW78NgOQ

Our Corner Protectors are mainly for using with cargo secure products.

Most of them are made of plastic,and some by rubber,only a few special ones are made of steel.

You could find many different options at WinnerLifting,but for the quality of them,you could only find premium quality here!!

These corner protectors are well packed in big cartons,and then it comes the standard pallets.

We've shipped them to many countries,you don't have to worry about anything.

If you are in this business,let's see what surprise you could find here!Thanks.

Packing of another one


Corner Protectors

Corner Protector,Plastic Corner Protector,Edge Protector

WINNERLIFTING(H.K.)INT'L TRADING LIMITED. , https://www.ratchetstrap.de